在可降解颗粒的加工过程中，一些企业增加了制造机械的滚动敏感应用功能，有效地提高了塑料颗粒加工的质量和功率。可降解颗粒的加工工艺主要涉及塑料颗粒的分类限制包装膜的机械清洗和清洗应用三个方面。下面小编为您讲解。

In the processing of degradable particles, some enterprises have increased the rolling sensitive application function of manufacturing machinery, effectively improving the quality and power of plastic particle processing. The processing technology of degradable particles mainly involves the classification of plastic particles and the mechanical cleaning and cleaning application of packaging film. The following section explains it for you.

一：为了控制滚动颗粒包装的大应用领域，可降解颗粒起到了清洁的作用，增加了对严格的塑料盖进行分类清洗的相对较高的制造成本，防止了再生颗粒的粉尘污染控制的出现。

1： In order to control the large application field of rolling particle packaging, degradable particles play a cleaning role, increase the relatively high manufacturing cost of classified cleaning of strict plastic covers, and prevent the emergence of dust pollution control of recycled particles.

二：压力下的机械搅拌过程可以避免高冲突强度的情况。通过对塑料动态分异中不同清洗程序的清洗过程进行过滤，有效地加入碱洗可减少塑料颗粒的干燥和破碎。

2： Mechanical mixing under pressure can avoid high conflict intensity. The drying and crushing of plastic particles can be reduced by filtering the cleaning process of different cleaning procedures in plastic dynamic differentiation and effectively adding alkali washing.

三：按照控制塑料颗粒的成本处理程序，增加机械生产冲突也会增加冲击强度，造成机械磨损，从而控制碱性清洗机的高滚动功率。

3： According to the cost control procedure for plastic particles, increasing the mechanical production conflict will also increase the impact strength, causing mechanical wear, thus controlling the high rolling power of the alkaline cleaner.

可降解塑料配方原理分析：

Principle analysis of degradable plastic formula:

降解过程主要涉及生物降解，光降解和化学降解，这三种主要降解过程相互间具有增效、协同和连贯作用。例如，光降解与氧化物降解常同时进行并互相促进；生物降解更易发生在光降解过程之后。

The degradation process mainly involves biodegradation, photodegradation and chemical degradation, and these three main degradation processes have synergistic, synergistic and coherent effects. For example, photodegradation and oxide degradation often go on at the same time and promote each other; Biodegradation is more likely to occur after the photodegradation process.

以上三种处理方法是可降解颗粒处理的主要用途。为了提高塑料颗粒的加工质量，要求厂家严格按照标准要求控制每一道工序。根据可持续发展战略的原则，做好塑料球的加工不仅可以?；の颐堑纳婊肪?，而且可以很好地利用废弃物资源。关注我们http://www.1958666.com给您带来更多相关内容！

The above three treatment methods are the main uses of degradable particles. In order to improve the processing quality of plastic particles, the manufacturer is required to control each process in strict accordance with the standard requirements. According to the principle of sustainable development strategy, the processing of plastic balls can not only protect our living environment, but also make good use of waste resources. Follow us http://www.1958666.com Bring you more relevant content!